Низкорамный полуприцеп FAYMONVILLE MAX 710 Tiefbett 2+4 PA

Описание

You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website.

Overview of equipment. Full equipment list available on request.

Neck (gooseneck):
* Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm
* 2 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN)
* For 6x4 or 8x4 2-axle tractor units

Compact front bogie:
* Hook pick-up front and rear, length: approx. 2,200 mm
* Bogie width: approx. 2,850 mm

Dwsc Eexbmplsd Ddcob
Excavator deck:
Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear
* Basic width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance of approx. 150 mm

4-axle rear bogie:
* Mechanical bolt-lug coupling at the front for mounting a lowbed
* Rear crossmember bogie width: approx. 2,850 mm
* Bogie length: approx. 5,480 mm

Pendulum axles, all axles hydro-mechanically steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation

Tyres:
* Front bogie:
* 8 x manufacturer’s choice (M+S) 285/70 R19.5
* Rear bogie tyres:
* 16 x manufacturer’s choice (M+S) 285/70 R19.5
* Load index 150/148J

Paintwork:
* Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system
* Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL

Including the following accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck
* 3.5 inch kingpin
* Truck hydraulic connection with flow control (20 l/min)
* Support gallows for supply lines, tractor unit tank must be at least 80 l
* with MAX Trailer couplings, otherwise customer to supply coupling parts ex works
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with separate air connection for air screwdriver
* BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2
* One 7-pin socket left and right rear on the front bogie for warning signs
* Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN)
* Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2
* At the rear bogie, a socket for the cable remote control of the steering
* Rear bogie with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

* Radio remote control:
* Operation of the powerpack, start/stop of the diesel engine
* Control of the steering, in addition to the cable remote control

* One LED work light each left and right at the end plate of the gooseneck with...