Косилка Mulag MULAG MKF 600

Описание

MULAG combination mower MKF 600 for attachment to Unimog mower combination MKF600 comprising: - Front boom mower MFK 500 - Edge strip mower MRF Basic device for one and two-man operation, designed for front attachment plate size 5 with the following equipment: Equipment front boom mower MFK 500 - for right-hand work - Boom swivel range: 190 degrees - hydraulically acting collision protection with damping of the boom system by hydraulic accumulator - hydraulic transverse displacement of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) - floating position of the working equipment that can be switched on / off - quick-change device for working equipment - SAFETY STOP Electric blade shaft switching on / off from the control panel, including brake valve - Operating hour counter - Proportional control mlcontrol permanent hydraulics included - (Can bus technology) of the boom including dual cylinder actuation (several functions can be carried out simultaneously) - Boom relief control type AER, infinitely variable contact pressure adjustment via potentiometer, can be switched on/off - Operator information system with TFT color display, including system control and diagnostic aid - Multifunction lever mlbasic one-hand control unit with multifunction lever (ergonomically adapted to the right hand, 4 functions on one level. All functions can be controlled proportionally) - Combination control unit - Control of both devices via a multi-function control lever - Oil cooling system included with electrical temperature monitoring - Device drive front PTO - Hydraulic pump for drive 1st work device 62l / 340 bar - Hydraulic pump for drive 2nd work device 50l / 280 bar - Oil filling Panolin HLP Synth fully synthetic, quickly biodegradable - Boom system telescopic boom hydraulically adjustable, to increase the reach by 1,000 mm - Reach 6.50 m from the center of the vehicle in combination operation - Reach 7.00 m from the center of the vehicle in solo operation - 2-way electro-hydraulic switch valve switchable from the control unit (additional hydraulic double functions) - Hydraulic rotation device for work devices, swivel range 230° switchable from the control unit. Integrated on the boom side, including quick-change plate. - Hydraulic couplings quick coupling kit for flat-sealing quick couplings on the mower - Cable set ES6 connection front Unimog Connection of the control unit via the universal electrical interface ES6 of the Unimog - Hydraulic parking support Including 2 pieces, height adjustable - LED work lights 2 pieces, mounted on the boom - High pressure water hose routing on the boom Edge strip mower MRF 350 Consists of the following configuration: Edge strip mower MRF 350 - for working on the right - Reach 3.50 m from the center of the vehicle - Hydraulic transverse adjustment of the edge strip mower by 1000 mm (in combination operation) - SAFETY STOP Electric blade shaft on/off from the control unit, including brake valve (the run-on time of the blade shaft is limited to approx. 4 seconds) - Operating hour counter - Automatic touch: Control of the mowing head around obstacles. The mowing speed adjustment of the evasive movement can be continuously adjusted by the driver on the control panel. - One-hand control unit with holder in the Unimog verge mower head RMK 1200 - Working width: 1200 mm, cutting thickness: max. 10 mm - Blade MS-R - Blade shaft speed: approx. 3000 rpm - Sensor arm standard mower head MK 1200 plus -
Nlsc Rsv A U Dwo Nc Ifnsc